Tag Archives: lens fix

DIY: Easy Fix For Lens Creep / Slip

Happy new year everyone!

I have a used Canon EF 24-105mm and one of the issues it had was that the lens kept sliding out from its own weight (and apparently this happens a lot with this model: here’s a link to an example: Lens creep 24-105mm). This made it really annoying when I would hang the camera around my neck (or any time the camera would point upward/downward) because the lens would fully extend (or sink back down) out on its own; this problem is what camera-folk call “Lens Creep.”Apparently this happens to a lot of heavier lenses with zoom from either “wear and tear” over time or some say their lens came straight out of the box this way. If your lens is new and out of the box this way, I’d recommend you return it or contact Canon (or whoever) for a different lens, BUT! if it’s a problem that has developed overtime and you want a cheap fix without going to some fancy-expensive camera shop, then please continue on with this blog 🙂

The example I’ll be using is my Canon 24-105mm Lens, but this will work on any lens! So I’ve seen places recommend rubber bands or using “Lens Bands” which is a company that makes bands specifically for this fix, however, the Lens Bands run around 5-13 bucks if you go on Amazon (which a rip off for what it is) and I didn’t have good enough rubber bands that people were recommending on hand, so I found something that lots of people would already have instead! Just looking at the Band, I realized that all you really needed was a Charity Wristband. I got some, tested the theory and boom! it worked like a charm! plus, this method is super cheap and the money goes to a good cause! Charity Wristbands generally only run $1-2 bucks and you can get them in any color or support a specific cause of your choosing.

3 DIY steps for an easy and cheap fix to Lens Creep / Slip

1) Obtain a Charity Wristbands. Drug stores, sport stores, etc will generally carry these.

Image2) Get your lens, remove the lens hood if you have one (for the fastest way to put the band on with ease), and locate the Zoom Ring.” This is where the band will go around.

Image3) Place the band around the Zoom Ring. This will provide a small amount of needed friction around the zoom ring and prevent further lens creep / slip. (Ensure that the band will fit around the lens. Depending on the size of the lens or the band you have, you may have to get a smaller/bigger one.)

ImageTa daaa! Now your lens will no longer have that annoying creep/slide…hopefully!

Advertisements

Leave a comment

Filed under DIY, Friends, FYI, Photography, Reviews